SmartLVL 8 Framing is a H1.2 treated Laminated Veneer Lumber (LVL) structural framing timber available as 90 x 45 mm, 140 x 45 mm, 190 x 45 mm, 240 x 45 mm and 300 x 45 mm sections that is an alternative to Radiata pine solid timber suitable for use where Hazard Class H1.2 applies.

The post SmartLVL 8 (NZ Only) appeared first on SmartFrame by Tilling.

Provides excellent nail plate tooth capacity (Refer to nail plate data from your nail plate
supplier)

JD4 joint strength for nails, screws and bolts

Ideal for girder truss applications

Lightweight truss material for easier handling and lifting on site

The post SmartChord14 appeared first on SmartFrame by Tilling.

Stock SmartLVL 14 is H2s (glue line) treated for use South of the Tropic of Capricorn. It can be post- production pressure treated to H2 or H3 to AS/NZS 1604.

SmartLVL comes with a clear new generation short term water repellency H2O Shield™ to replace the old fashioned wax sealers used by most other LVL manufacturers. H2O Shield™
is a water-based sealer specifically formulated for Tilling Timber Pty Ltd.

The post SmartLVL14 appeared first on SmartFrame by Tilling.

Smart10 is engineered for precision and consistency, delivering perfectly straight walls from studs to lintels—no packing or planing required. Designed as a direct replacement for MGP10 pine, Smart10 meets strict structural requirements and enhances build speed and accuracy on-site.

Smart10 is an E10 grade LVL, suitable for use in any application where LVL is permitted, offering reliable strength and performance across a wide range of structural uses.

• Grade: E10
• Applications: Suitable for use in all residential and light commercial construction
• For spans and specifications, please refer to the Smart10 Design Guide

Range

Smart10 offers a comprehensive range:

Lengths:  2.4m to 6.0m in 600mm increments.

Please contact your state sales team for available size and lengths.

Specifications

• Third party certified to AS/NZS 4357.0 and CMI ProdCertPC101
• Meets or exceeds the structural properties of MGP10 pine
• Adhesive rating: A bond
• Emissions: E0

H20 Shield™

Smart10 comes standard with H20 Shield™, a high-penetration, water-based surface treatment that repels rain and moisture during storage and construction.

• Clear, short-term water-repellent coating
• Paintable with acrylic or oil-based coatings
• Glueable with standard construction adhesive

 Treatment Options

All SmartLVL products come as H2S treated as standard for termite protection south of the Tropic of Capricorn.

Other treatment options include:

• H2 – termite treatment north of Tropic of Capricorn
• H3 – treatment against decay, termites, and other insects

Compliance

SmartFrame engineered wood products are designed to meet Australian standards and sustainability expectations:

• Compliant with the National Construction Code (NCC)
• Certified under PEFC Chain of Custody
• Manufactured from certified, sustainable timber sources
• Subject to regular third-party audits to maintain conformity and structural integrity

SmartFrame Warranty

All SmartFrame products are backed by a comprehensive warranty and supported by SmartFrame’s engineering team.

Got a question about Smart10?

We’re here to help! Whether you’d like product advice, technical support, or general information, please contact us using the details below:

Sales: 1800 337 703

Technical Support: 1300 668 690

The post Smart10 LVL appeared first on SmartFrame by Tilling.

SmartPlank scaffold plank is only intended for use as a Scaffold plank – i.e. for support of persons equipment and materials on scaffold constructed and loaded as per relevant Australian Standard.

Use for any other purpose voids continued use as a scaffold plank – SmartPlank used for any other purpose (or subject to trauma) should: 1. Have edge labelling on both sides planed off 2. Be indelibly and permanently marked by painting or stencilling as no longer suitable as a scaffold plank.

PROOF LOADING

ALL SmartPlanks undergo extensive proof testing within the factory prior to shipment. All SmartPlanks in service should undergo regular proof testing to ensure their structural integrity.

Subsequent proof test load should be twice the WLL and the plank should be tested with critical defects as near as possible to the load point but on the opposite face. For planks longer than their maximum span, and where there is no clearly defined suspect weak point, testing of planks in a number of positions and orientation is suggested.

Appendix B of AS 1577 sets out a method for determining the strengths of scaffold planks in bending. Users may develop their own test methods provided that this proof test method meets the requirements of the test as described in the above standard.

The post SmartPlank appeared first on SmartFrame by Tilling.

SmartForm is JAZ-ANZ certified by SAI-Global.  It is manufactured to meet the requirements of AS/NZS 4357 – Structural Laminated Veneer Lumber.

Easy Identification

SmartForm is produced in industry standard sizes of 150 x 75mm, 95 x 63mm and 95 x 45mm. Painted safety orange for easy visual identification, each piece of SmartForm is branded at least once with the SmartForm branding, compliant with AS/NZS 4357 structural LVL standard for identification and evidence of compliance with manufacturing control standards and product quality certification.  It is also sealed with a water resistant coating to increase its durability, providing the user with extended lifecycles and superior performance.

Design Support

Please refer to the SmartForm Design Guide for the most common formwork applications.  For applications, service classes not covered in this Design Guide and/or general product enquiries about SmartForm, please contact SmartFrame technical support on 1300 668 690 or at smartdata@tilling.com.au

The post SmartForm appeared first on SmartFrame by Tilling.

SmartEdge is painted orange for easy visual identification.  It is also sealed with a water-resistant yellow coating to increase its durability, providing the user with extended lifecycles and superior performance.

High Performance

The cross lamination of the layered veneers reduces the effects of cupping in high moisture environments.

Produced from sustainable timber, and harvested from certified plantations, SmartEdge is not only a straight and true, uniformly consistent edging, it is also an environmentally friendly composite timber product.

The post SmartEdge appeared first on SmartFrame by Tilling.

Red Alert wall is a H2S treated LVL used for wall framing studs, plates and noggings.

• No twists, no warps and no shrinkage
• Coloured “Red” for easy identification
• Strong and light Laminated Veneer Lumber
• Glue-line H2S treatment as per AS/NZS 1604.4

Lengths 2.4 -12.0 m (please check availability on lengths greater than 9.0 m)

Please note: This is not an external product and should not be used for decking situations.

For further information regarding this product please download our brochure.

The post Red Alert 12 appeared first on SmartFrame by Tilling.

SmartLVL13 comes with a clear new generation short term water repellency H2O Shield™ to replace the old fashioned wax sealers used by most other LVL manufacturers. H2O Shield™ is a water-based sealer specifically formulated and exclusively licensed in Australia to Tilling Timber Pty Ltd.

H2O™ shield offers numerous key benefits:

1. High-penetrating surface treatment
2. Formulated to repel rain during storage and construction
3. Includes a biocide/fungicide
4. Paintable – acrylic and oil based coatings
5. Glueable – using standard construction adhesives between the LVL and wood or plaster products
6. When transporting or walking on the LVL, it does not become slippery like the wax surface coating
7. Environmentally friendly

Preservative Treatment options

Stock SmartLVL13 is H2s (glue line) treated for use South of the Tropic of Capricorn. It can be post- production pressure treated to H2 or H3 to AS/NZS 1604.4.

The post SmartLVL 13 appeared first on SmartFrame by Tilling.